Re: Street/Strip Engine help
Greg, I would like to buy the 441's from you if you don't use them. With that being said the 441's would work just fine but like you said for any long term street car you need to have hardened seats installed. I have used the 416's with good success on small motors 305's and 307's. But they come with the 1.84's, which I believe you can up to 1.94's. Don't use the 520's the runners are two small for this application. I know they were used on 250hp 327's but you have a choice for a better head. But, from my experience if you can swing it get a set of later model vortec heads. I can't remember the p# but out of the box with a low lift street cam they really do work! I do not see you combo having any problem running the times desired. Good luck. By the way your converter, that is a 10" correct? Let me know about the heads?
|