CLASS RACER FORUM - View Single Post

SCOTT SST2871 · 08-26-2011, 04:06 PM

I went through a similar issue but i only ran 9 lbs of air and the tire was slipping on the rim..i would mark the tire at the valve stem and see if it moves any after 10 runs or so..any movement will cause inconsistencys
scott fifield

08-26-2011, 04:06 PM	#2
SCOTT SST2871 Member Join Date: Oct 2008 Location: PORT ST JOHN FLORIDA Posts: 226 Likes: 0 Liked 0 Times in 0 Posts	Re: Rim screws I went through a similar issue but i only ran 9 lbs of air and the tire was slipping on the rim..i would mark the tire at the valve stem and see if it moves any after 10 runs or so..any movement will cause inconsistencys scott fifield