CLASS RACER FORUM - View Single Post - Testing coils on a coil over plug system?

buzzinhalfdozen · 09-15-2011, 08:33 AM

Art, the LS1 coil pinout is A= ground, B=low reference to PCM, C=coil control PCM, D=Ign power or B+ The low reference on terminal B is the PCM ground for the coil. Hope this helps. BTW you stated that this all seemed to start after using the launch funtion in the ECU, in what manner does your system limit RPM? does it do Ign. only, fuel only or a combination of these?

09-15-2011, 08:33 AM	#4
buzzinhalfdozen Senior Member Join Date: Sep 2006 Location: Bellevue Ohio Posts: 984 Likes: 0 Liked 11 Times in 8 Posts	Re: Testing coils on a coil over plug system? Art, the LS1 coil pinout is A= ground, B=low reference to PCM, C=coil control PCM, D=Ign power or B+ The low reference on terminal B is the PCM ground for the coil. Hope this helps. BTW you stated that this all seemed to start after using the launch funtion in the ECU, in what manner does your system limit RPM? does it do Ign. only, fuel only or a combination of these? __________________ Joe Buchanan SS/BX 3117