CLASS RACER FORUM - View Single Post

rod · 09-23-2011, 11:59 PM

make sure the ID of the housing is nice and clean. bearing going in and out have a tendency to gaul up a bit. a small dia. flap wheel on an air grinder will polish up the bore. when nice and clean, the axle will slide out with a good hard pull by hand. use white lube or anti-seeze in the bore.
rod in Az

09-23-2011, 11:59 PM	#3
rod Member Join Date: Dec 2009 Location: Kingman, NW AZ. in the middle of the longest stretch of Route 66 Posts: 315 Likes: 0 Liked 20 Times in 15 Posts	Re: strange axles in ford mustang housing make sure the ID of the housing is nice and clean. bearing going in and out have a tendency to gaul up a bit. a small dia. flap wheel on an air grinder will polish up the bore. when nice and clean, the axle will slide out with a good hard pull by hand. use white lube or anti-seeze in the bore. rod in Az