CLASS RACER FORUM - View Single Post

Run to Rund · 02-23-2012, 11:02 AM

I have ground the block plate before--cheaper to replace later if another block is used in the future. .004 is probably OK because of the distance from the pilot bearing, assuming you are measuring at the bolt areas. Also you can change the order and tightness of the bolts in their sequence to see if the measurement changes.

02-23-2012, 11:02 AM	#6
Run to Rund Senior Member Join Date: Sep 2007 Location: Henderson, NV Posts: 584 Likes: 9 Liked 54 Times in 27 Posts	Re: Quick time bell housing question. I have ground the block plate before--cheaper to replace later if another block is used in the future. .004 is probably OK because of the distance from the pilot bearing, assuming you are measuring at the bolt areas. Also you can change the order and tightness of the bolts in their sequence to see if the measurement changes.