Quote:
Originally Posted by art leong
What do you do to the fuel map during the 2 step function?
Trying to get it smooth at 3200 but in gear it's rough.
Can't use data because it shows real lean because it randomly kills 25% of the cylinders. So it has a lot of unburned oxygen.
|
Art, you don't do anything to it. If you can duplicate WOT at that RPM with no 2 step just dial the air/fuel ratio in that way & forget it. An engine dyno can load it WOT and hold it there. That is how I did mine. it wasn't far off. I did it before by setting the 2 step down to 2000. That gave me a look at it as it went past 3200 hitting on all cylinders. It was very close to the engine dyno data.