CLASS RACER FORUM - View Single Post

Ed Wright · 02-28-2012, 04:07 PM

If the V.E. table & injector flow rate are set up correctly the V.E. around the torque peak should be around 100%, then if you want to lean from 12-1 to 13-1, subtract 10%, should be really close. To go the other way add 10%. 13-1 to 12.5, add 5%, etc.
Works with FAST XFI & Big Stuff3, DFI, should work with any system. Your results may vary. LOL

02-28-2012, 04:07 PM	#9
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: Fuel injected 2 step? If the V.E. table & injector flow rate are set up correctly the V.E. around the torque peak should be around 100%, then if you want to lean from 12-1 to 13-1, subtract 10%, should be really close. To go the other way add 10%. 13-1 to 12.5, add 5%, etc. Works with FAST XFI & Big Stuff3, DFI, should work with any system. Your results may vary. LOL __________________ Ed Wright 4156 SS/JA