CLASS RACER FORUM - View Single Post

chris ok · 03-06-2012, 01:48 PM

Santhuff springs are machined flat on both ends of their springs and you have to remove 1 coil on 1 end so the fit in spring pocket in lower control arm of Camaros, chevelles, novas etc. You can fit the flat end in it if you like, I would not as it does not fit into the pocket in the lower arm then.
I cut mine. fit fine. Santhuff says no problem cutting them as first coil is a dead coil as they put it.

03-06-2012, 01:48 PM	#6
chris ok Senior Member Join Date: Jul 2002 Location: Long Island, New york Posts: 592 Likes: 131 Liked 46 Times in 29 Posts	Re: Front springs Santhuff springs are machined flat on both ends of their springs and you have to remove 1 coil on 1 end so the fit in spring pocket in lower control arm of Camaros, chevelles, novas etc. You can fit the flat end in it if you like, I would not as it does not fit into the pocket in the lower arm then. I cut mine. fit fine. Santhuff says no problem cutting them as first coil is a dead coil as they put it.