View Single Post
Old 04-04-2012, 08:11 PM   #24
Mike Croley
Member
 
Join Date: Apr 2010
Posts: 182
Likes: 0
Liked 0 Times in 0 Posts
Default Re: 55 gal drum: What transfer pump to use?

Quote:
Originally Posted by Johnymia Racing View Post
Interesting stuff here. I also am using the plastic pump and although I was leery at first, the thing works like a charm. I am concerned about vapors building up in the drum as the weather gets hotter. I have been going out and opening the cap on the drum to release the pressure on a regular basis.
I keep the pump hanging an only put it in the drum when I need fuel. Am I still OK here?
Thoughts?
The pressure build up in the drum is caused by big swings in temperature . The very last thing you ever want to do is let that pressure out of the drum . First , because of the explosion hazard . Second , because the vapors you're releasing are the light ends and those have a big effect on how well your race fuel performs . Keep any container of race gas in a cool , shaded area that sees as little temperature swing as possible . Inside your shop is good , inside the race trailer is bad . The temps in a closed race trailer are very high and then cool off at night .
You're correct about the pump , only install it in the drum when you need fuel , then take it out and re-seal the container tightly .
Mike Croley is offline   Reply With Quote