CLASS RACER FORUM - View Single Post

Paul Precht · 06-02-2012, 09:08 PM

A 3.5" stroke is almost identical to the 350Chev, not a big torque motor, add to that, big ports and two fours, not good. A smaller duration, less aggressive cam with a bit of advance would be something I would try if it were me. With a four speed, you should be able to run 125 MPH and keep the engine at or under 7,000 RPM with the proper gearing and cam timing.

06-02-2012, 09:08 PM	#8
Paul Precht Senior Member Join Date: Dec 2001 Location: Elysburg, Pa Posts: 733 Likes: 360 Liked 327 Times in 121 Posts	Re: Stocker Cam Lobe Profile ? A 3.5" stroke is almost identical to the 350Chev, not a big torque motor, add to that, big ports and two fours, not good. A smaller duration, less aggressive cam with a bit of advance would be something I would try if it were me. With a four speed, you should be able to run 125 MPH and keep the engine at or under 7,000 RPM with the proper gearing and cam timing.