CLASS RACER FORUM - View Single Post

rod · 10-31-2012, 05:06 PM

I assume the test was on the actual lobes, more than that i was not told. the brake-in was with the single outer spring. [dual spring pressure was in the area of 150 seat. personally i would have used a lower pressure for the brake-in, because the springs had to come off any but.....]
yes roller rockers and it was a lunati [sp] solid lifter.
anyway the cam tested low on the rockwell. so Andy is really ticked off.
thanks for the help.
rod in AZ

10-31-2012, 05:06 PM	#6
rod Member Join Date: Dec 2009 Location: Kingman, NW AZ. in the middle of the longest stretch of Route 66 Posts: 315 Likes: 0 Liked 20 Times in 15 Posts	Re: cam/lifter rockwell ? I assume the test was on the actual lobes, more than that i was not told. the brake-in was with the single outer spring. [dual spring pressure was in the area of 150 seat. personally i would have used a lower pressure for the brake-in, because the springs had to come off any but.....] yes roller rockers and it was a lunati [sp] solid lifter. anyway the cam tested low on the rockwell. so Andy is really ticked off. thanks for the help. rod in AZ