Quote:
Originally Posted by Mike Pearson
Make sure the lower link connecting the rear end to the frame is running down in the front at least 2 degrees.the bottom bar must run at a down angle ( lower in the front ) in relationship to the rocker panel. If it is running up it will not hook up even on the best track with new tires. You may need to adjust the ride height to correct this problem if it exists.
Mike
|
that bears repeating
all said
THAT is exactly what I am experiencing... no traction, no matter WHERE the tire pressure is !
Mike, it would be basically impossible to make the lower control arm rake "down", while even remotely staying within the rules.
By lowering the car though, I can get a lot closer... and the upper arms will provide that snap down ( up on the body ) on the axle housing when it tries to rotate back under engagement.
Thank YOU, Mike !