CLASS RACER FORUM - View Single Post

Mike Pearson · 07-20-2007, 02:41 PM

You will have to make some adjustments to the attachment at the rear end housing and the frame to get the proper geometry. there is no way the car will work in its present set up.You might be able to put a band aid on it by slipping the clutch. but that will create excess heat and the clutch will fail prematurely and the car will be inconsistent. Lower the ride height and extend the lower brackets on the rear end housing as much as you think you can get away with. Fabricate them to look as stock as possible. This is definatley your problem.

Mike

07-20-2007, 02:41 PM	#22
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,456 Likes: 618 Liked 1,945 Times in 586 Posts	Re: 62 Chevrolet, STILL No Traction You will have to make some adjustments to the attachment at the rear end housing and the frame to get the proper geometry. there is no way the car will work in its present set up.You might be able to put a band aid on it by slipping the clutch. but that will create excess heat and the clutch will fail prematurely and the car will be inconsistent. Lower the ride height and extend the lower brackets on the rear end housing as much as you think you can get away with. Fabricate them to look as stock as possible. This is definatley your problem. Mike __________________ Mike Pearson 2485 SS