View Single Post
Old 03-17-2013, 08:32 PM   #13
Paul Ceasrine
VIP Member
 
Join Date: Apr 2009
Posts: 2,546
Likes: 0
Liked 10 Times in 10 Posts
Default Re: 1967 Pontiac Firebird

1967 Pontiac Firebird 'H.O'

Called the 'Light Heavyweight'

With a 'special' 'High Output' 326/285 HP.

285 Horsepower @ 5000 RPM's
359 Foot Pounds/Torque @ 3200 RPM's

* 3.719" Bore x 3.750" Stroke
* 10.5 -1 Compressior Ratio

Featuring Casting {#141} 'High Compression' Cylinder Heads with
(52.0 CC) Combustion Chambers.

1.92" Intake / 1.64" Exhaust

Camshaft = .386" Intake / .421" Exhaust - 269* / 277* Duration - 47* Overlap

Valve Springs = (#95 lbs. = Valve Closed) - (#225 lbs. = Valve Open)

Carter AFB (600 CFM) - (1 7/16" Primary x 1 11/16" Secondary)

Dual Exhaust (2.00" Primary} - (2.25" Tail-Pipe)

4-Speed (M-20 Wide-Ratio) = 2.52 - 1.88 - 1.46 - 1.00

Clutch = 10.4" (6.5" Inside) - .140" Thickness - #2050 lbs.. Load-Rate

2-Speed Power-Glide Automatic

Gear-Ratio's = 3.08 - 3.23 - 3.36 - 3.55 - 3.90
--------------------------------------------------------------------------------------------------

Special Order Options;

* 4-Speed (M-21 Close-Ratio) = 2.20 - 1.64 - 1.28 - 1.00

* Turbo Hydra-Matic (3-Speed Automatic)

* 4.33 Gear-Ratio
-------------------------------------------------------------------------------------------------

Only 6078 Produced


Last edited by Paul Ceasrine; 03-17-2013 at 11:41 PM.
Paul Ceasrine is offline   Reply With Quote