Re: rod bearings recommendation
Looks like a VanderVel logo....and that is my guess....
They were around 25 years ago and I used them on some engines
Clevitte did not make H bearings yet...and the VanderVels were good...
They usually had a little more clearance than a Clevitte....
VanderVel is part of Mahle now and so is Clevitte I believe...
We used Clevittes in almost every engine as well as some C&A's and VanderVels occasionally.....
__________________
Rich Biebel
S/C 1479
Stock 147R
|