CLASS RACER FORUM - View Single Post

John Nechiporchik · 06-24-2013, 06:58 PM

Recently acquired stocker has an Accel Calmap 6.0 Engine Management System.
The current set up is open loop, has separate O2 sensor system, and EGT's.
I have a tune-up matrix that came with the car that allows fuel map changes based on % up and down from a base setting.
I would like to talk to someone who has experience with this system to answer a few ( well, maybe more than a few) questions on how to effectively utilize this unit.
I realize there is later technology out there, but this is going to have to work for now.
Any helpers out there? BTW....Engine is a 98 LT1 prepared by Woodro Josey.

Thanks,
John

06-24-2013, 06:58 PM	#1
John Nechiporchik Member Join Date: Mar 2007 Location: Grosse Ile Mi. Posts: 316 Likes: 84 Liked 13 Times in 7 Posts	Help with Accel Calmap 6.0 Recently acquired stocker has an Accel Calmap 6.0 Engine Management System. The current set up is open loop, has separate O2 sensor system, and EGT's. I have a tune-up matrix that came with the car that allows fuel map changes based on % up and down from a base setting. I would like to talk to someone who has experience with this system to answer a few ( well, maybe more than a few) questions on how to effectively utilize this unit. I realize there is later technology out there, but this is going to have to work for now. Any helpers out there? BTW....Engine is a 98 LT1 prepared by Woodro Josey. Thanks, John