Re: 305 Chev Sleeves?
If you want to sleeve 350 down to 305, I would look @ melling CSL283 is 3.800 bore which you could finish to 3.796 if you were going .060 or could go .070 or .080 CSL 283 is 1/8'' wall so OD should be where it will press into 4.050 hole w/ about .002 press.
As J Ryan said a 307 would be good choice also.
I had Darton make some custom sleeves years ago for 4 cyl. project,at that time you had to do a min. of 12 pieces I believe.
Mike Taylor 3601
|