CLASS RACER FORUM - View Single Post

Dave Noll · 11-12-2013, 07:22 PM

Billy,
250 @ .050", 299@ .006", 105 lobe separation installed @ 103. Lift right now is .375" with the stock rockers but should be .407". They told me the cam wouldn't be the problem, the carb would. I protested a little cause it sounded big to me but they assured me this was a good one. (it's a Cleveland, run it like one).

11-12-2013, 07:22 PM	#3
Dave Noll Senior Member Join Date: Nov 2007 Location: Div. 6, Eastern, WA Posts: 710 Likes: 2,677 Liked 240 Times in 112 Posts	Re: 2 bbl. Motorcraft & a dwell cam Billy, 250 @ .050", 299@ .006", 105 lobe separation installed @ 103. Lift right now is .375" with the stock rockers but should be .407". They told me the cam wouldn't be the problem, the carb would. I protested a little cause it sounded big to me but they assured me this was a good one. (it's a Cleveland, run it like one). __________________ Dave Noll, EF/S ,?/SA 6526