CLASS RACER FORUM - View Single Post

RPM5595 · 11-20-2013, 01:40 AM

I went with the 250 L6 seal and wire method. I installed the wire on the outboard side of the seal to keep the seal positioned as far forward against the Block groove as possible. The ends of the seal butt up nicely and I staggered them like normal. Haven't run it on the Dyno yet but it looks like it should work. Thanks for all the input.

11-20-2013, 01:40 AM	#7
RPM5595 Member Join Date: Mar 2002 Location: Nashua,Iowa Posts: 136 Likes: 84 Liked 32 Times in 14 Posts	Re: Replacement for rope seal in a 283? I went with the 250 L6 seal and wire method. I installed the wire on the outboard side of the seal to keep the seal positioned as far forward against the Block groove as possible. The ends of the seal butt up nicely and I staggered them like normal. Haven't run it on the Dyno yet but it looks like it should work. Thanks for all the input. __________________ Jay Roeder facebook.com/racefuelsales Former N/SA , Soon to be SS/AS, Renegade Race Fuel dealer