CLASS RACER FORUM - View Single Post

boostedf22c · 12-20-2013, 10:37 PM

The rules for Stock read

"Steel flywheel shield meeting SFI Spec 6.1 or 9.1 mandatory on all V8 cars with a clutch. Flywheel shield cannot be modified for clutch adjustment and/or cooling holes. "

Then is says to see general regulations where it states

"The use of aluminum bell housing is permitted in all categories and applications. Aluminum bell housing must meet SFI specs. and no modifications to the as-manufactured design are permitted."

12-20-2013, 10:37 PM	#2
boostedf22c Member Join Date: Dec 2009 Location: Lebanon, IN Posts: 483 Likes: 0 Liked 0 Times in 0 Posts	Re: Quick time bellhousing The rules for Stock read "Steel flywheel shield meeting SFI Spec 6.1 or 9.1 mandatory on all V8 cars with a clutch. Flywheel shield cannot be modified for clutch adjustment and/or cooling holes. " Then is says to see general regulations where it states "The use of aluminum bell housing is permitted in all categories and applications. Aluminum bell housing must meet SFI specs. and no modifications to the as-manufactured design are permitted." __________________ Carey Bales 316D DD/AT www.racetactics.net