CLASS RACER FORUM - View Single Post

Aubrey N Bruneau · 12-30-2013, 12:21 AM

I use 1.7 ratio in an engine that calls for 1.75. The difference has been made up through the cam lobe. Lift at valve checks about .007" under my max allowed.
I have twice asked NHRA about this. As mentioned, they're concern was higher ratio rocker, and of course the actual lift measured at the valve.

just my experience... which is limited

12-30-2013, 12:21 AM	#3
Aubrey N Bruneau Member Join Date: Sep 2003 Location: South Eastern Alberta, Canada Posts: 311 Likes: 6 Liked 7 Times in 3 Posts	Re: Rocker Arm Ratio I use 1.7 ratio in an engine that calls for 1.75. The difference has been made up through the cam lobe. Lift at valve checks about .007" under my max allowed. I have twice asked NHRA about this. As mentioned, they're concern was higher ratio rocker, and of course the actual lift measured at the valve. just my experience... which is limited __________________ Aubrey N Bruneau 6409 C/S 62 BelAir sport coupe, 409 HP 409