CLASS RACER FORUM - View Single Post - Adjusting Valve Lash with Schubek/Smith Lifters

GTX JOHN · 04-29-2014, 12:53 PM

I adjust Zero lash and make sure that I can only turn the pushrods with quite a fair
amount of drag

Some of them have 015 travel and some have 030.....Terrible quality control.
If they get loose the puck sometimes fall out and destroys the engine!
Check lash often a look for any bending pushrods increasing lash before
disaster strikes!

Your results of course may vary.

04-29-2014, 12:53 PM	#4
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,736 Likes: 2,808 Liked 2,488 Times in 698 Posts	Re: Adjusting Valve Lash with Schubek/Smith Lifters I adjust Zero lash and make sure that I can only turn the pushrods with quite a fair amount of drag Some of them have 015 travel and some have 030.....Terrible quality control. If they get loose the puck sometimes fall out and destroys the engine! Check lash often a look for any bending pushrods increasing lash before disaster strikes! Your results of course may vary. __________________ John Irving 741 Stock 741 Super Stock