[Bruce Noland]

350/270 Chev Short Block - Coated CP pistons, Total Seal Rings, Bushed Lifter Bores with Schubeck Lifters, Bullet Cam, Chev rods, Electric Water Pump, Balanced by Bub. 10 runs total. $1,750.00.

350/270 Chev Short Block- Ross Pistons, Total Seal Rings, Bushed Lifter Bores (no lifters), Good Bullet Cam, Bub Whitaker blueprinted and assembled piece. This block has a small repair but was running strong when I changed to another combination. It set the J/SA record at 11.29 a few years ago. It should be freshened but slap some parts on it and run it if you wish. $950.00.

350 Chev Bracket Long Block, Lunati Stroked crank (.013), 993 heads with 2.02 Valves, everything except manifold, carb, distributor. Ran 11.70's in a 3,450 pound car. About 30 runs since it was built. $1,250.00.

Original BB Chev Aluminum High Rise Intake, Cut Plenum, Great Condition $325.00

Large "school bus" Oil Pan for BB Chev. Cleaned, with Oil Trap and Painted. $275.00.

Buick 455 Block, Cleaned, Magnafluxed and deburred. It's meant to be the best of the 455 Blocks. $375.00

Buick Heads for 455, Cleaned and Magnafluxed. Not sure of their value. PM me about these. Also have new Stainless Valves for these heads.

2 Moroso 24 x 15 tires. 10 passes. $150.00

ATI Balancer for 350 Chev $175.00

Two Metric Converters. One PTC and One Dynamic. $225.00 each.

Complete High Desert Fuel Analyzer kit. Great condition. Cost $495 new. Now $275.00

B&M, Pro Bandit Shifter with Forward and Reverse Shift Plates for 3 Speed Transmissions and one plate for a Glide, Two different length shift Cables. Ten Passes Total. Beautiful Aluminum piece. All together this kit cost $600.00. Now $325.00.

Weld Wheels, Aluma Star,10x15 with 3 1/2" back spacing, GM Bolt pattern, nearly new. Mounted slicks on them but they did not fit my car. They were never on the ground. About $800.00 new. Now $425.00.

All prices exclude freight.

Thanks