CLASS RACER FORUM - View Single Post

brian schuetta · 06-02-2015, 08:16 AM

Heads have been surfaced but not the block. I pulled the heads because the truck sat for a long time and the gas was bad. Whatever the gas turned into got on the valves and caused them to hang up. The pistons look like 325/396 but the chambers are semi open. Not really sure what the hp rating is on this engine. Right now I just want to drive it around again, its just plain fun, 402/TH-400/4.11 Dana.

06-02-2015, 08:16 AM	#2
brian schuetta Member Join Date: Apr 2005 Location: san antonio tx Posts: 259 Likes: 5 Liked 28 Times in 15 Posts	Re: 396 Gaskets? Heads have been surfaced but not the block. I pulled the heads because the truck sat for a long time and the gas was bad. Whatever the gas turned into got on the valves and caused them to hang up. The pistons look like 325/396 but the chambers are semi open. Not really sure what the hp rating is on this engine. Right now I just want to drive it around again, its just plain fun, 402/TH-400/4.11 Dana.