CLASS RACER FORUM - View Single Post - MW driveshaft /push rods/valve springs etc

Ed Carpenter · 06-14-2015, 12:21 AM

MW aluminum driveshaft 3 1/2 dia 44 3/4" center of ujoint to ujoint 1350 with yoke for Jerico or turbo 400 250.00

1 set kmotion k1000h used valve springs 1.625 2" install ht 75.00

G force open face helmet snell 31.1/2005 50.00

Mr gasket 3/4 aluminum spacer part#1932 on it 10.00

1 set heads up cylinder head exhaust plates off 283 SBC heads 30.00

SBC cast intake 3840905 Chevy II /chevelle 2 bbl 283/195hp 50.00

Lakewood 90/10 front shocks 62-67 Chevy II 50.00

Multiple sets of Manley/Comp cams Pushrods 3/8 and 7/16. 75.00 per set shipped

I have 8.05, 7.875,7.80, 7.75 and 8.25 lengths.

66 Chevy II grille. Some dings and dents 40.00

Text me at 512-517-8235 or email trooper10538@netzero.com for pictures or more info.

06-14-2015, 12:21 AM	#1
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,710 Likes: 187 Liked 520 Times in 132 Posts	MW driveshaft /push rods/valve springs etc MW aluminum driveshaft 3 1/2 dia 44 3/4" center of ujoint to ujoint 1350 with yoke for Jerico or turbo 400 250.00 1 set kmotion k1000h used valve springs 1.625 2" install ht 75.00 G force open face helmet snell 31.1/2005 50.00 Mr gasket 3/4 aluminum spacer part#1932 on it 10.00 1 set heads up cylinder head exhaust plates off 283 SBC heads 30.00 SBC cast intake 3840905 Chevy II /chevelle 2 bbl 283/195hp 50.00 Lakewood 90/10 front shocks 62-67 Chevy II 50.00 Multiple sets of Manley/Comp cams Pushrods 3/8 and 7/16. 75.00 per set shipped I have 8.05, 7.875,7.80, 7.75 and 8.25 lengths. 66 Chevy II grille. Some dings and dents 40.00 Text me at 512-517-8235 or email trooper10538@netzero.com for pictures or more info. __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development Last edited by Ed Carpenter; 06-14-2015 at 07:31 PM.