Mine has basically stock parts. The upper control arm have been lowered an inch (the old Shelby trick). 90/10 shocks and Moroso springs. The springs I cut 3 loops to get the nose down. After a couple of years added 1' rubber spacers to raise it a little. The rubber is getting beat out of the spring perches so the roller bearing ones would be a good upgrade. Poly bushings for the strut rods and a thick washers. Mine tries to pull the nut through the thinner washers. Willwood disc brakes up front. My Sprint will run 10.50's - .60's with low 1.40's 60' numbers footbraking with a 2 step.
Jeff
