CLASS RACER FORUM - View Single Post

Run to Rund · 06-24-2015, 09:36 AM

Can you try wrapping a shim about .009" or .010" around the dowel, just enough for a snug fit, and use blue loctite so you can get it back out if needed. I drill and tap mine for 5/16 x 18 so I can take them out with a slide hammer.

06-24-2015, 09:36 AM	#8
Run to Rund Senior Member Join Date: Sep 2007 Location: Henderson, NV Posts: 586 Likes: 9 Liked 56 Times in 29 Posts	Re: Bellhousing alignment issue Can you try wrapping a shim about .009" or .010" around the dowel, just enough for a snug fit, and use blue loctite so you can get it back out if needed. I drill and tap mine for 5/16 x 18 so I can take them out with a slide hammer.