Re: carb air entry pan for the Super 10
It's kind of vague tho...
AIR CLEANERS
Optional. If used, air cleaner must be OEM automotive or retain
OEM configuration. Air-cleaner base may be cut or trimmed, but
welding, bolting, riveting, epoxying, or any other form of
fabrication is prohibited. Ram tubes, velocity stacks, or non-stocktype
base plates or ducting prohibited. Cooling holes prohibited in
radiator side panels, etc. Factory air cleaners and/or scoops that
fit through hood must be affixed to carburetor as per OEM only.
__________________
Rich Taylor
I/SA - 321
|