CLASS RACER FORUM - View Single Post

Mark Ugrich · 10-31-2015, 12:41 PM

I ran a similar combination for a few years.306 c.i. small block,2900 lb. car.A little smaller cam and 4 speed.I would also suggest the Victor Jr., However an Edelbrock F4-B would be a good choice for a dual plane.I used one of those with a 1" spacer before the Victor manifolds were available.

10-31-2015, 12:41 PM	#3
Mark Ugrich Member Join Date: May 2011 Location: Auburndale,Florida Posts: 220 Likes: 29 Liked 71 Times in 38 Posts	Re: 302 ford intake advise I ran a similar combination for a few years.306 c.i. small block,2900 lb. car.A little smaller cam and 4 speed.I would also suggest the Victor Jr., However an Edelbrock F4-B would be a good choice for a dual plane.I used one of those with a 1" spacer before the Victor manifolds were available.