Quote:
Originally Posted by Mike Pearson
I welded some threaded inserts into the floor pan similar to the stock seat mounts. I drilled the threads out of the seat inserts an used a 3/8 grade 8 bolt with a large flat washer to bolt through the bottom of the seat to the floor. 1 half inch bolt through the back into the cross bar
|
OK, so you actually have the seat sitting on the floorpan? I sandwiched the floorpan between 2 pieces of steel but mad seat mount brackets under the seat that are adjustable for tilt.
Are stock factory seat adjusters legal? I've had a car with a poly seat that had the poly seat bolted to the adjusters.