CLASS RACER FORUM - View Single Post

FireSale · 05-05-2016, 10:19 AM

No. It's probably something like this that I found on Summit just now. Click on the Instructions link and look at the installation diagrams. A regulator goes in the line anywhere between the pump and the carb. It just has to fit the line size you use. I have a Magnaflow regulator on a Holley Black pump feeding the 4bbl on my 302.

Link:
http://www.summitracing.com/parts/ms...a/instructions

EDIT: Wire it to a relay to keep the high amp switching stuff out of the cabin. If you don't know how to do a relay wiring, here is a good instruction sheet at this link:
http://www.summitracing.com/parts/mr...a/instructions

Any 30 or 40 amp 5 pin relay will do. You don't need the one in the link. May $6 not counting the wire and connectors.

Dale

05-05-2016, 10:19 AM	#2
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: Mallory Fuel Pump Regulator No. It's probably something like this that I found on Summit just now. Click on the Instructions link and look at the installation diagrams. A regulator goes in the line anywhere between the pump and the carb. It just has to fit the line size you use. I have a Magnaflow regulator on a Holley Black pump feeding the 4bbl on my 302. Link: http://www.summitracing.com/parts/ms...a/instructions EDIT: Wire it to a relay to keep the high amp switching stuff out of the cabin. If you don't know how to do a relay wiring, here is a good instruction sheet at this link: http://www.summitracing.com/parts/mr...a/instructions Any 30 or 40 amp 5 pin relay will do. You don't need the one in the link. May $6 not counting the wire and connectors. Dale __________________ Dale Shearon 68 Mustang 6394 Last edited by FireSale; 05-05-2016 at 10:29 AM.