CLASS RACER FORUM - View Single Post

ss3011 · 05-07-2016, 10:22 AM

Converter pressure is about 1/2 of line pressure . If the converter failed because it ballooned, then usually you will see damage on the crank thrust bearing . If the converter has ballooning plates, and is furnace brazed, it should be able to handle over 150 psi @ 7000 rpm .

05-07-2016, 10:22 AM	#2
ss3011 Senior Member Join Date: Feb 2002 Location: Southeast Michigan Posts: 909 Likes: 70 Liked 239 Times in 114 Posts	Re: Metric 200 Pump Pressure Converter pressure is about 1/2 of line pressure . If the converter failed because it ballooned, then usually you will see damage on the crank thrust bearing . If the converter has ballooning plates, and is furnace brazed, it should be able to handle over 150 psi @ 7000 rpm .