Quote:
Originally Posted by Eman
Mine were stripped out, not loose. I just drilled and retapped what was there. Loose isn't a problem as they will tighten up when the bolt tightens. If I have any furthur problems all I would do is drill a hole in the side of the sheetmetal frame member and use a nut inside. There isn't much pressure on those bolts.
|
I think the problem with Brian's car, is the trapped nuts are rounded off, so they just spin in the cage. Kind of like the trapped nuts in my 1973 Firebirds spring hanger, when the clips break you need to cut them out, bummer !