CLASS RACER FORUM - View Single Post - How do i get a radial slick to hook on a marginal track ??

1320racer · 06-27-2016, 10:55 AM

Al, if your shocks are single adjustable, start with the rears set at full stiff and the front at full loose. if the car hooks then spins, start tightening up the front shocks. Your typical burnout should be no longer than 4 seconds, half that when it's HOT out and pay attention to the starting line condition, stage outside of the bald spots if possible.

06-27-2016, 10:55 AM	#35
1320racer VIP Member Join Date: Nov 2007 Location: New Jersey Posts: 2,628 Likes: 160 Liked 759 Times in 379 Posts	Re: How do i get a radial slick to hook on a marginal track Al, if your shocks are single adjustable, start with the rears set at full stiff and the front at full loose. if the car hooks then spins, start tightening up the front shocks. Your typical burnout should be no longer than 4 seconds, half that when it's HOT out and pay attention to the starting line condition, stage outside of the bald spots if possible.