Re: Battery hold down.
Relocated battery(s)
must be fastened to frame or frame structure with a minimum of
two 3/8-inch-diameter bolts.
OEM located batteries without
complete OEM hold-down hardware must be secured to OEM
battery box/tray using the same 3/8-inch-diameter bolt hold-down
method described in previous sentence.
OEM hold-down can be used on battery in original location but (IMHO) common sense should probably dictate something more than the stock clamp in a high HP, wheelstanding Stocker.
Relocated batteries need at least 3/8 rods.
__________________
Billy Nees 1188 STK, SS
I'm not spending 100K to win 2K
|