CLASS RACER FORUM - View Single Post

Sean Marconette · 05-10-2017, 12:55 PM

Darrel,

You need to tighten up the rev limiter set points. Do you not have it set for the soft limiter? You should see 2 set points the high and low RPM. I run the same system, and my settings have a 50 RPM difference. For example 7200 for the high and 7150 for the low. You should see in a data log that the engine is maintained between the high and low. This was one of the fixes with v4. There were a lot of complaints on the rev limiters doing what you just described and that was addressed with v4.

Sean

05-10-2017, 12:55 PM	#3
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 977 Likes: 794 Liked 275 Times in 76 Posts	Re: Reaction times Darrel, You need to tighten up the rev limiter set points. Do you not have it set for the soft limiter? You should see 2 set points the high and low RPM. I run the same system, and my settings have a 50 RPM difference. For example 7200 for the high and 7150 for the low. You should see in a data log that the engine is maintained between the high and low. This was one of the fixes with v4. There were a lot of complaints on the rev limiters doing what you just described and that was addressed with v4. Sean __________________ Sean Marconette 84 Mustang 5060 SS/N Last edited by Sean Marconette; 05-10-2017 at 01:05 PM. Reason: More info