CLASS RACER FORUM - View Single Post

SDT1DYI · 06-06-2017, 10:26 PM

I made up a fixture to measure the hanger dimensions. Pretty easy to do. I had several Q jets so I sectioned one so I could see exactly how the secondary rod changes with hanger letter changes. K, G etc.
What I experienced on the Dyno, using LL .040 tips rods , thinking I was riching the secondaries, it went lean. Dont understand why??? I found the primary side jet size numbers can be way off, BEST to flow every jet you have to know for sure which way you are really going with your jet changes.

Thanks to all that responded.

06-06-2017, 10:26 PM	#7
SDT1DYI Member Join Date: Nov 2016 Location: Indianola Washington Posts: 401 Likes: 0 Liked 453 Times in 146 Posts	Re: Q Jet Secoundary Rods I made up a fixture to measure the hanger dimensions. Pretty easy to do. I had several Q jets so I sectioned one so I could see exactly how the secondary rod changes with hanger letter changes. K, G etc. What I experienced on the Dyno, using LL .040 tips rods , thinking I was riching the secondaries, it went lean. Dont understand why??? I found the primary side jet size numbers can be way off, BEST to flow every jet you have to know for sure which way you are really going with your jet changes. Thanks to all that responded.