Re: Hydraulic Thow out bearing
Here are a few pictures to give you an idea of how I did Eric's DragPak.
The sleeve is bushed and is welded thru the frame rail and the supported at the bellhousing .
I'm looking for a better picture of the bellhousing end .
You will have to fabricate a custom shifter mount and longer linkages.
The left side of the tunnel will also need work to clear the linkage .[/QUOTE]
Thanks Tom. I appreciate the pictures and description.
I could tell before that it's going to be complicated to switch to mechanical linkage...and it is.
Definitely not a "bolt it" operation.
Happy New Year!
__________________
Todd Gross
3323 FS/E,F
|