CLASS RACER FORUM - View Single Post

John Nechiporchik · 04-21-2018, 11:09 AM

I also just installed the Tom Waters shield on my metric 200. I had a new brace made to allow the shield to fit. The new brace had a slight interference with the Lokar dipstick, so I also re located the dip stick to the location in front of the servo that was originally used for some sort of a kickdown cable. Masta Performance in Michigan makes a dipstick tube to fit this arrangement and it fits perfectly and has a bracket that bolts to the bellhousing. It is Masta's P/N 200TV.
I use a Hurst Quarter stick and the cable bracket that mounts to the trans required some tweaking (grinding for clearance).

04-21-2018, 11:09 AM	#5
John Nechiporchik Member Join Date: Mar 2007 Location: Grosse Ile Mi. Posts: 316 Likes: 84 Liked 13 Times in 7 Posts	Re: Trans shields for 2018 I also just installed the Tom Waters shield on my metric 200. I had a new brace made to allow the shield to fit. The new brace had a slight interference with the Lokar dipstick, so I also re located the dip stick to the location in front of the servo that was originally used for some sort of a kickdown cable. Masta Performance in Michigan makes a dipstick tube to fit this arrangement and it fits perfectly and has a bracket that bolts to the bellhousing. It is Masta's P/N 200TV. I use a Hurst Quarter stick and the cable bracket that mounts to the trans required some tweaking (grinding for clearance).