CLASS RACER FORUM - View Single Post

Jim Caughlin · 05-18-2018, 06:03 PM

I would think there is grounds to consider that the whole front tire pressure affecting RT's might be somewhat of an urban legend. As a test, I put my car on a flat floor in the shop and put a 3" block in front and behind the front tire at the 40PSI that I normally run and measured the distance between the blocks. I then started lowering the pressure in increments and remeasured the distance. I got all the way down to 15 PSI (which I thought was probably an unsafe pressure to actually race at) and the distance between the block had barely changed. Maybe the 3" height wasn't quite right but it has to be pretty close to the correct height for the photocell. Based on that, I kind of wonder if the real life change in RT is in the drivers head and not a result of the rollout. If you doubt my test, try it yourself.

Jim Caughlin
SS6019

05-18-2018, 06:03 PM	#4
Jim Caughlin Senior Member Join Date: Mar 2002 Location: Woodburn, Or Posts: 685 Likes: 83 Liked 805 Times in 245 Posts	Re: Front tire pressure adjustments I would think there is grounds to consider that the whole front tire pressure affecting RT's might be somewhat of an urban legend. As a test, I put my car on a flat floor in the shop and put a 3" block in front and behind the front tire at the 40PSI that I normally run and measured the distance between the blocks. I then started lowering the pressure in increments and remeasured the distance. I got all the way down to 15 PSI (which I thought was probably an unsafe pressure to actually race at) and the distance between the block had barely changed. Maybe the 3" height wasn't quite right but it has to be pretty close to the correct height for the photocell. Based on that, I kind of wonder if the real life change in RT is in the drivers head and not a result of the rollout. If you doubt my test, try it yourself. Jim Caughlin SS6019