CLASS RACER FORUM - View Single Post

CMcAllister · 07-30-2018, 08:38 PM

I don't do these things everyday, but I know some guys who have fought this with a high RPM Torqueflite combination. I would ask someone about those cooler line pressures. 50PSI at 2k - hard to tell what it is as the RPM go up. I do remember that some people were using a pressure relief system to dump fluid from the cooler system directly to the pan to limit that pressure. Flexplate to crankshaft bolts leaving marks on the front of the converter? Verify the clearance there for reference before unbolting everything. Converter snout not bottoming or jamming in the crankshaft flange bore? Front trans pump chewed up?

07-30-2018, 08:38 PM	#18
CMcAllister Senior Member Join Date: Sep 2006 Location: Fulton County, PA Posts: 616 Likes: 17 Liked 920 Times in 259 Posts	Re: Mopar 904 trans pressure I don't do these things everyday, but I know some guys who have fought this with a high RPM Torqueflite combination. I would ask someone about those cooler line pressures. 50PSI at 2k - hard to tell what it is as the RPM go up. I do remember that some people were using a pressure relief system to dump fluid from the cooler system directly to the pan to limit that pressure. Flexplate to crankshaft bolts leaving marks on the front of the converter? Verify the clearance there for reference before unbolting everything. Converter snout not bottoming or jamming in the crankshaft flange bore? Front trans pump chewed up?