CLASS RACER FORUM - View Single Post

Dave Noll · 09-03-2018, 09:53 PM

Myself, I have just switched lifters. BUT, the pattern on the cam had to appear normal, I lubed the lifters just like installing a new cam. Put break in oil in the pan. Set lash and ran it for a Half hour at 2500. With a hydraulic cam there are no clearance ramps ground into it so I run lash tighter than usual. (under .010)

09-03-2018, 09:53 PM	#2
Dave Noll Senior Member Join Date: Nov 2007 Location: Div. 6, Eastern, WA Posts: 709 Likes: 2,649 Liked 238 Times in 111 Posts	Re: Solid lifters in Stock Myself, I have just switched lifters. BUT, the pattern on the cam had to appear normal, I lubed the lifters just like installing a new cam. Put break in oil in the pan. Set lash and ran it for a Half hour at 2500. With a hydraulic cam there are no clearance ramps ground into it so I run lash tighter than usual. (under .010) __________________ Dave Noll, EF/S ,?/SA 6526 Last edited by Dave Noll; 09-04-2018 at 05:34 PM.