Thread: Winch
View Single Post
Old 01-06-2019, 04:44 PM   #7
FireSale
VIP Member
 
FireSale's Avatar
 
Join Date: Feb 2014
Location: Lakewood Washington
Posts: 1,407
Likes: 29
Liked 237 Times in 126 Posts
Default Re: Winch

Quote:
Originally Posted by L79racer View Post
Bought this wireless remote off amazon to use with my superwinch LT4000.
works great.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
This one is listed as not available, but there are several other universal wireless winch remotes on Amazon of around $15-30. The Superwinch one I saw was $300 something unless it was a misprint.


Note to tilt users: In reading up on mounting winches on tilt trailers I came across an interesting work around for the weight that needs to be offset when it's mounted on the deck.



Found it on Ford460
"My buddy has a similar setup, and I'll try to explain the best I can. The winch is mounted to the front A frame just behind the jack. The cable feeds under the immoveable front portion of the deck. From there it goes to a pulley mounted underneath the tilt section, very near to the pivot point. At that pulley the cable turns around towards the front of the trailer. There is another pulley on the front of the tilting section. The cable now goes around that pulley and up onto the deck, where you would use it to drag stuff. The pulley's have tabs that keep the cable from coming off, and it runs in a channel from the winch to the first pulley. It sounds more complicated than it is, and it works great. Hope that helped."
__________________
Dale Shearon
68 Mustang 6394

Last edited by FireSale; 01-06-2019 at 05:05 PM. Reason: Found the post I wanted to quote.
FireSale is offline   Reply With Quote