CLASS RACER FORUM - View Single Post

Adger Smith · 02-18-2019, 05:23 AM

Larry,
The Gen 6 blocks are a lite by quite a bit, but pans, covers and lifters are different. Then the 2 piece rear seal adapter or 1 piece crank.
I assume this is just for your bracket ride.. I have a Std 4 bolt Mark IV I have Decked, align hone and ARP main studs, no fill.. Might make std on some hi limit pistons. I will check it in the morning.
I also have a short deck Gen 6 Marine. Siamese cyl. 4.53 bore, 9.780 deck, align honed w/2 piece seal adapter fitted and installed. No filler.
All machine work is fresh on both ^^^..
I have a couple new Merlins and a Brodix in stock.
You know I've got a shop full of good stuff.
Call me.

02-18-2019, 05:23 AM	#1
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: BBC 454 block Larry, The Gen 6 blocks are a lite by quite a bit, but pans, covers and lifters are different. Then the 2 piece rear seal adapter or 1 piece crank. I assume this is just for your bracket ride.. I have a Std 4 bolt Mark IV I have Decked, align hone and ARP main studs, no fill.. Might make std on some hi limit pistons. I will check it in the morning. I also have a short deck Gen 6 Marine. Siamese cyl. 4.53 bore, 9.780 deck, align honed w/2 piece seal adapter fitted and installed. No filler. All machine work is fresh on both ^^^.. I have a couple new Merlins and a Brodix in stock. You know I've got a shop full of good stuff. Call me. __________________ Adger Smith (Former SS) Last edited by Adger Smith; 02-18-2019 at 05:25 AM. Reason: sp