Quote:
Originally Posted by Eman
Probably is, but if you're not allowed a transbrake this is a way to leave at the same RPM every time footbraking.
I tend to scrub the brakes before the stripe to tighten it up, doing this with my foot on the throttle. If I didn't have a way to shut the 2 step off it would stutter at the top end. I have a switch that controls the power to the brake pressure switch and a small LED on the dash to show when the brake pressure activates the 2 step so I know I'm on the brake hard enough at the starting line.
I've thought about using a high gear pressure switch on the trans that would open the power circuit in high gear.
|
And there I thought I was the only one to use an LED like that!