CLASS RACER FORUM - View Single Post

Dave Ribeiro · 02-29-2008, 10:54 PM

Solid tranny and motor mounts are hard on bellhousings, driveshafts out of balance,you should have a torque strap, use only stock type mounts(rubber)...You convertor is too tight for that combo, I also haven't ever heard of a GP weighing 3,200 lbs...Make sure everything is lined up and nothing else is cracked....Also, check the rearend, you maybe surprised..Good - Luck
Dave...1033/stock(350) Pontiac

02-29-2008, 10:54 PM	#1
Dave Ribeiro VIP Member Join Date: Sep 2002 Location: Williamsburg, Va.---USA Posts: 1,827 Likes: 1,612 Liked 56 Times in 27 Posts	Re: Question for a tranny guy Solid tranny and motor mounts are hard on bellhousings, driveshafts out of balance,you should have a torque strap, use only stock type mounts(rubber)...You convertor is too tight for that combo, I also haven't ever heard of a GP weighing 3,200 lbs...Make sure everything is lined up and nothing else is cracked....Also, check the rearend, you maybe surprised..Good - Luck Dave...1033/stock(350) Pontiac __________________ Dave Ribeiro 1033 STK