CLASS RACER FORUM - View Single Post

Bill Grubbs · 10-11-2019, 12:45 PM

Maybe I'm doing it wrong, but using a solid bearing spacer I torque my MW nut to 250+/- with an electric impact. I then fill the void between the nut and the yoke with Permatex Ultra Grey. I have been doing my own 12 bolt rear ends for 15 years, and never had any issues (R&P or otherwise).

It does however take some time to dig out the Ultra Grey when it is time to remove the pinion gear.

10-11-2019, 12:45 PM	#7
Bill Grubbs Member Join Date: Oct 2002 Location: Magnolia, Texas Posts: 416 Likes: 3 Liked 564 Times in 66 Posts	Re: pinion nut loose Maybe I'm doing it wrong, but using a solid bearing spacer I torque my MW nut to 250+/- with an electric impact. I then fill the void between the nut and the yoke with Permatex Ultra Grey. I have been doing my own 12 bolt rear ends for 15 years, and never had any issues (R&P or otherwise). It does however take some time to dig out the Ultra Grey when it is time to remove the pinion gear.