View Single Post
Old 07-13-2020, 12:30 PM   #9
gsa612
Senior Member
 
gsa612's Avatar
 
Join Date: Jan 2008
Location: 100th Meridian
Posts: 569
Likes: 116
Liked 280 Times in 139 Posts
Default Re: New slicks dish soap rim screws?

Quote:
Originally Posted by 55 Chevy View Post
For the M/T leakage I tried different brands of Dishwashing soap & also slime. Neither did the trick. Still weeped through the sidewalls. The only thing that sealed them right up was the "original" Coca-Cola(Thanks Don). Poured it on the sides,rubbed it in and let them sit in the sun. Turn over and repeat. Mounted up and no leakage.

My 10.5 x 29.5S C07 Hoosiers do not leak at all with nothing done on the inside.

I have been unable to stop the tire from moving on the rim without screws. Tried dry, Aqua-net hairspray and weatherstrip adhesive. Swapped them and they just repeated the other way. My latest effort is Permatex High Tack brush-on. Do not know if that will do it. I have heard that knurled rims will sometimes do the trick.

I believe the main problem is my old Motorwheel Flys because I know of people with the same class car, with more modern rims that do not use screws and there is no tire movement.
I would also say it may be the Fly's,just like the old Supertricks.Also I would be leery of using any kind of glue/sealer as it may "weld" the tire to the rim,and make it hard to remove the tire later.Those rims are flimsy and you don't want to bend or crack one!...gsa612
gsa612 is offline   Reply With Quote