CLASS RACER FORUM - View Single Post

Adger Smith · 07-25-2020, 12:33 AM

Larry, the problem I have is the tire height that will fit my car.
I know 14 X 32 on a 14" rim is too tall to even go under the car. (front hits)
I use a 1702 GY way back before they were discontinued. they were 14.5 wide and 96 1/4 roll out with stiff sidewalls.
I parked everything in 2010 and the set I have are not even good for doorstops.
I need between a 96 and 97 in roll out.
Don't see any good radials in that size.
Looks like I might be stuck with a bias tire again.
My car will start off at about 3400 lbs and then move to a 3175 lb class weight when the drivers license is taken care of.
I was real happy with the GY's. I put a lot of passes on 2 sets.
Larry if you get any private feed back I'm interested.

07-25-2020, 12:33 AM	#2
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: Goodyear Tires Larry, the problem I have is the tire height that will fit my car. I know 14 X 32 on a 14" rim is too tall to even go under the car. (front hits) I use a 1702 GY way back before they were discontinued. they were 14.5 wide and 96 1/4 roll out with stiff sidewalls. I parked everything in 2010 and the set I have are not even good for doorstops. I need between a 96 and 97 in roll out. Don't see any good radials in that size. Looks like I might be stuck with a bias tire again. My car will start off at about 3400 lbs and then move to a 3175 lb class weight when the drivers license is taken care of. I was real happy with the GY's. I put a lot of passes on 2 sets. Larry if you get any private feed back I'm interested. __________________ Adger Smith (Former SS)