Quote:
Originally Posted by Adger Smith
I found it on the http://www.brianswayneonline.info/index.html
Swayne has the pictures of the non rear pump and the rear pump VB's and they are different.Check out the size, spacing difference of the passages around the spool valve area!!
I would bet the spool valve that goes with each is different. It is not shown... :~(
I will try to upload the picture. You can use that link and look around for the pictures is you like. well, another case of Al's internet paying off with info!! :~) Kevin, I'm just like you... didn't know that one!! |
Thank you very much for the schematics of the valve body. Sometimes when using some one else's race trans, it's sometimes hard to find out just what the fine points of each builder's transes are. The schematic really helped. Now its time to compare some spool valves without mixing anything up and see what the differences are. Thanks again,Greg
P.S. Are the cases the same from a rear pump earlier aluminum trans to the later ones without the rear case?